Top Down Terrain makes terrain for Infinity, a skirmish tabletop wargame. They love Kingdom Death: Monster and recently released an in-box organizer to replace the included plastic tray. They gave me a copy of their Fan-Made Kingdom Death: Monster - Organizer to build an assembly guide around. Keep an eye out as they are working on display trays for the KD:M miniatures too. I like that all the game components have a dedicated section and you only need glue and rubber bands to assemble using the guide below. I've built a few MDF terrain pieces before and found the TDT pieces well designed and cut exactly to fit.

Everything in the example photos is sleeved per Organizing KD:M. There’s a couple millimeter gap so larger card sleeves should fit fine. Note that I laminated the Settlement Events and Locations and clipped with a rounded corner punch. The pictures show base game and all expansion content with room to spare.

Presented in general order of simplist to more complex to build - these are all straightforward:

1. Terrain tray
2. Small Card tray
3. Gear Card tray
4. Token tray
5. Event tray
6. Standard Card trays (2)
7. Kingdom Death in the TDT Organizer
8. Paint Update I plan on painting these in a matte black when it warms up a bit

Things to know before assembly and general guidelines:

• TDT recommends either wood glue or a gap filling gel/thick cyanoacrylate. I used the cyanoacrylate pictured above
• The walls of the trays have a specific fit - carefully check the bottom left and right corners and note the small tabs on the bottom align with the corresponding wall, reference the picture above
• Build from the inside of the tray to the outside (inserts, then walls)
• Dry fit (place without glue) the part together before gluing
• Apply a light bead of glue on the inside tab that will be covered up
• Carefully set or slide the part together
• Use a damp paper towel to quickly wipe off any excess glue
• Rubber bands are useful to apply pressure on edges while the glue sets
• Contrast and Brightness has been increased on the pictures to show detail

Terrain Tray Pack

Assembly layout - double check the lower corners for tabs that align to the corresponding wall.
Apply a thin bead of glue on the bottom and sides of the wall section tabs

Set the walls and secure with rubber bands

With Terrain

Small Card Tray Pack

Assembly layout - double check the lower corners for tabs that align to the corresponding wall. Note that the center section aligns into the middle slots

Apply glue to the side of the bottom tabs of the center sections and set

Apply a thin bead of glue on the bottom and sides of the wall section tabs and set with rubber bands
The card dividers can be glued if desired

With Cards

Gear Card Tray Pack

Assembly layout - double check the lower corners for tabs that align to the corresponding wall. Note that the center sections align into the middle slots

Apply glue to the side of the bottom tabs of the center sections and set

Apply a thin bead of glue on the bottom and sides of the wall section tabs and set with rubber bands
The card dividers can be glued if desired

With Cards

Token Tray Pack

Assembly layout - double check the lower corners for tabs that align to the corresponding wall. Note that the center sections align into the middle slots

Apply glue to the side of the bottom tabs of the center sections and set

Apply a thin bead of glue on the bottom and sides of the wall section tabs and set with a rubber band

Apply glue to the side of the bottom tabs of the dividers and set. The dividers fit tight and stand up on their own

With Tokens

Event Tray Pack

Assembly layout - double check the lower corners for tabs that align to the corresponding wall. Note that the middle sections align into the slots in the tray base

Dry fit the middle sections (they only fit one way) and apply glue to the side of the bottom tabs of the center sections and set

Apply a thin bead of glue on the bottom and sides of the wall section tabs and set with rubber bands

With Events - note the finger slots that let you easily pop up the Settlement Event and Location cards

Standard Card Tray Pack

Assembly layout - double check the lower corners for tabs that align to the corresponding wall. Note that the center section aligns into the middle slots

Apply glue to the side of the bottom tabs of the center sections and set

Apply a thin bead of glue on the bottom and sides of the long wall section tabs

Apply a thin bead of glue on the bottom and sides of the short wall section tabs and set with rubber bands

First Large Card tray with Core and Dragon King play cards

Second large Card tray with Expansion play cards

First layer with the 2 Large Card and Gear Card trays - note that everything is sleeved per Organizing KD:M

Second layer with Terrain, Token and Event trays